Your position: Cable Home > TECHNOLOGY >

The detection process of 10KV mining cable

Information Source:Henan Huadong Cable Co., Ltd Release date:2014-05-13

First of all, the outer shielding products production process should be used "out of the semi conductive shield + wrapped semi conductive screening + metal braided shield" structure, instead of extruded semi conductive shielding after direct metal braided shielding, in the insulated wire core plus around a layer of semi conductive shielding belt, braided shielding is embedded to prevent extrusion insulation shielding effect of partial discharge performance.

Secondly, the cable end requirements. The insulating shielding layer should use the knife and needle nose pliers, stripping, shielding layer end should be in the same section and have transition slope, shall not damage the insulation body, an insulating surface using a file down to clean, no residual semi conductive materials, insulated wire core end portions should be trimmed, conductor exposed parts should be closely and neatly, washing with ethanol insulation surface. Transformer oil test to be pure, not water, suspended solids and other impurities. Both ends of the cable is inserted into the cup, must be immersed insulation shielding incision insulating oil. The cable conductor and an electrode contact to the full, to ensure that the test process does not discharge end.

In addition, 10KV mining cable production process flow and the production process should be controlled strictly, especially to strengthen the control of the insulation extrusion process of curing temperature, curing time, steam pressure, take-up velocity, prevent the products appear less sulfur and the cable core inlet in the production process of PD results.

HUADONG Henan Huadong cable group is specialized in the research,development,and production of ABC Cable,Rubber Cable, mv medium voltage power cable,Control/Instrumentation Cable,Mining Cable, Bare Conductor(AAC/AAAC/ACSR/ACS), Huadong Cable Supply the price of 16mm armoured cable,Mc Interlocked Cable, 4 core 240 mm cable price at competitive.
  • Tel: +86-371-66766667
  • Whatsapp: +86 15093102503
  • Office: Nanpu International Center, Jinshui dustrict, Zhengzhou City, Henan P.R. China.
  • Factory: YunXiang East Road, Xiuwu Industry, Jiaozuo City.
  • Henan Huadong Cable Co., Ltd © 2000-2019 Copyrights Links:25mm swa armoured cable cable | 4 core armoured cable sizes