Your position: Cable Home > TECHNOLOGY >
Project

Our high-quality bare conductor types and specifications introduce

Information Source:Henan Huadong Cable Co., Ltd Release date:2014-03-18

We offer drivers for use in applications of medium and low tensión.estos drivers are resistant to corrosion, exhibits excellent resistance to the sea coast and polluted industrial areas. These are precision hardened on the surface to reduce the surface damage during the manipulación.tienen increased strength to weight ratio and reduces the total cost of each economic of the transmission lines
Lower power loss from AAC is homogeneous (with all chapters of aluminium alloy with a steel component, the resistance of AAAC is lower compared to that of ACSR
▪ Greater intensity: AAAC can carry at least 15 - 20% extra current in comparison to ACSR of equal size
▪ Long life: the experience in other countries shows that all drivers of aluminium alloy are in service for over 60 years, which is approximately double the life of ACSR conductors
▪ Surface hardness: the hardness of the surface of AAAC is 80 BHN against 35bhn of ACSR. This reduces the surface damage during the handling and the consequent lower corona loss and radio interference in mat
▪ Thermal stability: AAA drivers are stable up to 90�C ACSR conductors against? C which are stable up to 75�C.
▪ Higher strength to weight ratio: from AAAC has greater resistance to weight ratio, span car was increased from 2 to 15%, resulting in an overall reduction of costs / tower brackets and other fittings in transmission lines of the system

All Aluminium Alloy ConductorsClick to view the details

(Clauses 7.2.1 & 7.2.2) as per IS-398 (Part 4) - 1994
Actual area mm2 Stranding & wire dia mm Approx. Overall Dia mm Approx Mass kg/km Calculated maximum resistance at 20°C Ohms/km Approx calculated breaking load (KN)
15 3/2.50 5.39 40.15 2.3040 4.33
22 7/2.00 6 60.16 1.5410 6.45
34 7/2.50 7.5 94.00 0.9900 10.11
55 7/3.15 9.45 149.20 0.6210 16.03
80 7/3.81 11.43 218.26 0.4250 23.41
100 7/4.26 12.78 272.86 0.3390 29.26
125 19/2.89 14.45 342.51 0.2735 36.64
148 19/3.15 15.75 406.91 0.2298 43.50
173 19/3.40 17 474.02 0.1969 50.54
200 19/3.66 18.3 549.40 0.1710 58.66
232 19/3.94 19.7 636.67 0.1471 68.05
288 37/3.15 22.05 794.05 0.1182 84.71
346 37/3.45 24.15 952.56 0.0984 101.58
400 37/3.71 25.97 1101.63 0.0855 117.40
465 37/4.00 28 1280.50 0.0734 136.38
525 61/3.31 29.79 1448.39 0.0651 146.03
570 61/3.45 31.05 1573.71 0.0598 158.66
604 61/3.55 31.95 1666.00 0.0568 167.99
642 61/3.66 32.94 1771.36 0.0534 178.43
695 61/3.81 34.29 1919.13 0.0492 193.25
767 61/4.00 36 2115.54 0.0446 213.01
 

AAAC – HS Aluminium Alloy Stranded Conductor RECClick to view the details

Specification No. 33/1984
AAAC size equivalent to ACSR Nominal Al-Area Stranding and wire dia Sectional Area Approx. overall Dia Approx. Mass Calculated Resistance at 20°C maximum Approx. calculated breaking load
mm2 mm mm2 mm Kg/km Ohm/km kN
  14 3/2.50 14.73 5.38 40.15 2.304 4.331
Squirrel 20 7/2.00 21.99 6.00 60.13 1.541 6.467
Weasel 30 7/2.50 34.36 7.50 94.00 0.990 10.106
Rabbit 50 7/3.15 54.55 9.45 149.20 0.621 16.044
Racoon 80 7/3.81 79.81 11.43 218.26 0.425 23.473
Dog 100 7/4.26 99.77 12.78 272.86 0.399 29.344
 

Aluminium Conductors, Galvanized Steel-reinforced for extra high voltages IS 398(Part 5) : 1992(Click to view the details

(Clause 8.2.2)
Nominal Aluminium (1)mm Stranding and wire diameter Sectional area of Aluminium Total sectional area Approx overall diameter Approx mass Calculated resistance at 20°C Approx breaking load min.
Al. (2) mm Steel (3)
520 54/3.53 7/3.53 528.5 597.0 31.77 2 004 0.055 52 161.20
560 42/4.13 7/2.13 562.7 591.7 31.68 1 787 0.051 99 120.16
690 42/4.57 7/2.54 688.9 724.4 35.04 2 187 0.042 42 146.87
 

Stranded Aluminium Conductor Steel Reinforced (ACSR)(Click to view the details

S-398 (Part-2) 1996
Clauses 8.21 8.2.2 and 4.3.2
ACSR Code word Conductor size sq.mm Stranding Nos/mm Stranding Nos/mm Overall diameter mm Weight kg/km Ultimate strength kN Calculated Electrical resistance at 20°C Ohm/km Copper equivalent
Al. Steel Al. ACSR ACSR Al. Steel
Moie 10 6/1.50 1/1.50 10.60 12.37 4.50 43 29 14 3.97 2.780 6
- 18 6/1.96 1/1.96 18.10 21.12 5.88 73 50 23 6.74 1.618 11
Squirrel 20 6/2.11 1/2.11 20.98 24.48 6.33 85 58 27 7.61 1.394 12
Weasel 30 6/2.59 1/2.59 31.61 36.88 7.77 128 87 41 11.12 0.9289 19
Rabbit 50 6/3.35 1/3.35 52.88 61.70 10.05 214 145 69 18.25 0.5524 32
Raccoon 80 6/4.09 1/4..09 78.83 91.97 12.27 319 216 103 26.91 0.3712 48
Dog 100 6/4.72 7/1.57 105.00 118.50 14.15 394 288 106 32.41 0.2792 64
Wolf 150 30/2.59 7/2.59 158.10 194.90 18.13 726 437 289 67.34 0.1871 96
Panther 200 30/3.00 7/3.00 212.10 261.50 21.00 974 586 388 89.67 0.1390 129
Kundah 400 42/3.50 4/1.96 404.10 425.20 26.88 1281 1116 165 88.79 0.07311 246
Zebra 420 54/3.18 7/3.18 428.90 484.50 28.62 1621 1186 435 130.32 0.06868 261
Moose 520 54/3.53 7/3.53 528.50 597.00 31.77 1998 1461 537 159.60 0.05595 322
Morkulla 560 42/4.13 7/2.30 562.70 591.70 31.68 1781 1553 228 120.16 0.05231 343
 
Aluminum conducotor steel conductor High Ampacity ACSS conductorClick to view the details
Specification and type
Code Name KCMI) Stranding Cross Sectional Stranding Diameter (in) Weight (lbs/1000 ft)
2
Area (in )
Linnet/ACSS/TW 336.4 16 0.2641 0.307 2 18 7 x 0.0884 0.2652 0.659 315.9 145.5 461.4
Oriole/ACSS/TW 336.4 23 0.2642 0.3258 2 16 7 x 0.1059 0.3177 0.693 316.1 208.7 524.8
Flicker/ACSS/TW 477 13 0.3747 0.4233 2 18 7 x 0.0940 0.282 0.776 447.8 164.5 612.3
Hawk/ACSS/TW 477 16 0.3746 0.4356 2 18 7 x 0.1053 0.3159 0.789 448.1 206.4 654.5
Hen/ACSS/TW 477 23 0.3747 0.4621 2 16 7 x 0.1261 0.3783 0.825 448.3 296 744.3
Parakeet/ACSS/TW 556.5 13 0.4371 0.4937 2 18 7 x 0.1015 0.3045 0.835 522.4 191.8 714.2
Dove/ACSS/TW 556.5 16 0.4371 0.5083 2 20 7 x 0.1138 0.3414 0.852 522.9 241 763.9
Rook/ACSS/TW 636 13 0.4995 0.5643 2 18 7 x 0.1085 0.3255 0.89 597 219.1 816.1
Grosbeak/ACSS/TW 636 16 0.4995 0.5808 2 20 7 x 0.1216 0.3648 0.908 597.6 275.2 872.8
Scoter/ACSS/TW 636 23 0.4995 0.616 2 18 7 x 0.1456 0.4368 0.953 597.6 394.6 992.2
Tern/ACSS/TW 795 7 0.6244 0.6675 2 17 7 x 0.0886 0.2658 0.96 745.2 146.1 891.3
Puffin/ACSS/TW 795 11 0.6244 0.6919 2 18 7 x 0.1056 0.3168 0.98 745.9 228.5 974.

Note : (1) kN = 100,000,000 dyne = 102 kg
Note : The standard length of the conductor manufactured as per specific requirement of the customer and being supplied in non-returnable wooden drums or steel drum, quite strong, to withstand any kind of transit handlings in the erection field.

For more high-quality bare conductor type and specifications,Please kindly visit http://www.qscable.com/Bare-Conductor/!

HUADONG Henan Huadong cable group is specialized in the research,development,and production of ABC Cable,Rubber Cable, mv medium voltage power cable,Control/Instrumentation Cable,Mining Cable, Bare Conductor(AAC/AAAC/ACSR/ACS), Huadong Cable Supply the price of 16mm armoured cable,Mc Interlocked Cable, 4 core 240 mm cable price at competitive.
CONTACT DETAILS
  • Tel: +86-371-66766667
  • Whatsapp: +86 15093102503
  • Email:sales@hlcables.com
  • Office: Nanpu International Center, Jinshui dustrict, Zhengzhou City, Henan P.R. China.
  • Factory: YunXiang East Road, Xiuwu Industry, Jiaozuo City.
  • CONTACT
  • Henan Huadong Cable Co., Ltd © 2000-2019 Copyrights Links:25mm swa armoured cable cable | 4 core armoured cable sizes